FRAME
Page 25
Reproduction or translation, even partial, forbidden without the written consent of Peugeot Motocycles
-
Essential points for refitting the suspension arm
Suspension arm pre- assembled (mudguard, chain
guard, guide and tensioners fitted)
- Fit the rear brake caliper (1) through the suspension
arm behind the spacer (2)
- Position the suspension arm
- Locate the fixing spindle in the frame
- Tilt the pivot (3) forwards to locate the shock
absorber lower mount (4)
- Locate the pivot mounting pin on the suspension
arm (taking care with the sealing cups (5))
D o not pinch the hydraulic pipe
- Position the wheel and the caliper bracket
- Locate the wheel spindle making sure the bushes are
properly fitted
- Put the caliper in position (2 bolts)
- Fit the chain and tension it (see operation 10)
- Tighten all parts to the recommended torque
- Refit the suspension arm spindle caps