14
The "ZONE" is the time zone.
The "SEL" parameter of the DST (daylight saving time) can be set to OFF, EUR, USA or usr
(user). To enter user values, press the down arrow key when usr is highlighted and then use the
up/down arrow keys to move to the desired digits. Use the left/right arrow keys to change the
information. Press ENTER to accept and save the settings. The two MMDD settings are the DST
start and end dates, respectively.
Before using the DST feature, the correct date should be set, or erroneous data may be displayed
in the DST fields.
DISPLAY
The following parameters are available in this menu:
MODE
TIMEOUT
BRIGHTNESS
The MODE parameter determines in which situations the display is on. When the detector is
left unattended, there is no need to have the display on at all, while in other situations it may
be better to keep the display on at all times. The following values are available, ON, OFF,
AUTO (the display is turned off while the detector is asleep) and DIMMED (the display is
dimmed while the detector is asleep).
The TIMEOUT parameter determines the time that the display remains on after being
temporarily turned on with the ON/OFF key while the detector is in the sleep mode.
The BRIGHTNESS parameter determines the brightness of the display (00 = weakest, 255 =
brightest).
Use up/down arrow keys to move between the parameter and the left/right arrow keys to
change the value.
Press enter to save and return to the main menu.
