18 1-800-732-2677
The Receiver Collar
has to be held on
top of the Boundary
Wire to activate.
• Replace battery.
• Adjust Boundary Width Control knob clockwise to
increase the distance from the Boundary Wire that
the Receiver Collar activates. Verify the Boundary
Control Switch is placed at the proper setting
according to the amount of Boundary Wire used.
• If the Receiver Collar still has to be held on top
of the Boundary Wire, refer to Stubborn Dog
In-Ground Fence
™
Operating and Training Guide.
The Receiver Collar
activates inside the
house.
• Turn the Boundary Width Control knob
counterclockwise to decrease the distance from the
Boundary Wire that the Receiver Collar activates.
• Make sure the Boundary Wire is not running within
15 feet of the house. The signal can transmit through
the walls of your house.
• Make sure Boundary Wires are twisted from
Boundary to the Fence Transmitter.
The Receiver
Indicator Light is
flashing every 4 to 5
seconds and I have
just installed a new
battery.
• To reset the low battery indicator, remove the
battery from the Receiver Collar. Discharge all power
by holding the correction level button down until the
light is no longer illuminated. Reinstall battery.
Summary of Contents for Stubborn Dog In Ground Fence RF-275-11
Page 81: ...www petsafe net 81 ...
Page 82: ...82 1 800 732 2677 ...
Page 83: ...www petsafe net 83 ...
