120 www.petsafe.net
.
FI
SV
DA
NO
RU
EN
2-Dog System
Note: If you wish to add another Receiver Collar to the training system, Add-A-Dog
®
Extra
Receiver Collars are available through our Customer Care Centre.
To Add Dog 2
Handheld Remote
1. Press the Spray Down Button (lower right - grey)
consecutively until “2d” appears on the Digital Display.
2. After the “2d” appears press the +2 Boost Button (red).
3. Set Dog 1 Spray Level to the desired level using the Spray Up
and Down Buttons.
4. Press the +2 Boost Button to lock the Stimulation Level
for Dog 1.
5. Set Dog 2 Spray level to the desired level using the Spray
Up and Down Buttons.
6. Press the +2 Boost Button to lock the Stimulation Level
for Dog 2.
Dog 2 Receiver Collar
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off Button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. On the Handheld Remote, press the Upper Right or Lower Right Button.
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Centre.
Handheld Remote Functions for Dog 2 Mode
Dog 1 Tone
Upper Left Button (Green)
Dog 1 Spray
Lower Left Button (Purple)
Dog 1 +2 Boost
Press +2 Boost Button (Red) and the Lower Left Button (Grey)
simultaneously
Dog 2 Tone
Upper Right Button (Grey)
Dog 2 Spray
Lower Right Button (Grey)
Dog 2 +2 Boost
Press +2 Boost Button (Red) and the Lower Right Button
(Grey) simultaneously
STEP 4
Digital Display
Tone
Spray
Up
Charging Jack
(with cover)
Spray
Spray
Down
+2 Boost
