Customer Care 1 (800) 732-2677
6
1
2
3
Assemble Pet Fountain
1. Rinse all fountain components (except for the adaptor)
with warm water before use. This will remove any
residue from the manufacturing process. Place the foam
filter inside the bowl as shown.
2. Place the pump inside the foam filter on the bottom of
the bowl. The cord will be closest to the hole on the
back of the bowl. Press down on the pump to engage
the suction cups.
3. Once the pump is securely in place, feed the cord
through the hole on the back of the bowl and out the
notch on the bottom of the bowl.
4. Remove the extra slack from the cord and push the
rubber gasket firmly into the hole.
4