Petsafe PBC45-13339, Operating Manual

Page: 77 / 88

77 www.petsafe.net
FI
SV
DA
NO
RU
EN
Fit the Bark Control Collar
Important:
The proper fit and placement of your Bark Control Collar is important for
effective operation. The Vibration Points must have direct contact with your dog’s skin on
the underside of his neck.
Please refer to page 73 for Important Safety Information.
To assure a proper fit, please follow these steps:
1. Make sure that the battery is in the
“OFF“ position.
2. Have your dog standing comfortably ( A ).
3. Center the Vibration Points underneath your dog’s neck,
touching the skin ( B ). Note: It is sometimes necessary to
trim the hair around the Vibration
Points to make sure that contact
is consistent.
Do not shave the pet’s neck as this may increase the risk of
skin irritation.
4. Check the tightness of the Bark Control
Collar by inserting one finger between
the strap and the dog’s neck (
C
). The fit
should be snug but not constricting.
You should not make the collar any more tight than is required
for good contact. A collar that is too tight will increase the risk of
pressure necrosis in the contact area.
5. Allow your dog to wear the collar for several minutes, then recheck the fit. Check the
fit again as your dog becomes more comfortable with the Bark Control Collar.
C
B
SÍ
NO
A