background image

 petsafe.com 5

Quick Tip: When not using the collar, turn it off to extend battery life.

LED Function

The two color LED indicates the battery level. When the battery is low, the red LED will blink 3 times every 5 
seconds. When it is fully discharged, no LED will flash. When the collar is charged, the green LED will flash 
once every 5 seconds.

Fit the Collar

Important: The proper fit and placement of the bark collar is important for 

effective operation. The contact points must have direct contact with your 

dog’s skin on the underside of his neck. 

1.  Make sure that the collar is turned off. 
2.  Start with your dog standing comfortably (

A

).

3.  Place the collar on your pet so that the PetSafe

®

 logo 

is right side up and the collar is directly under your 
dog’s chin. Center the contact points underneath your 
dog’s neck, touching the skin (

B

). 

NOTE:

 It is sometimes 

necessary to trim the hair around the contact points to 
make sure that contact is consistent. However, you should 
never shave your pet’s neck as this may increase risk of 
skin irritation.

4.  Check the tightness of the collar by inserting one finger between the end of a  

contact point and your dog’s neck (

C

). The fit should be snug but not constricting.

5.  Allow your dog to wear the collar for several minutes, and then recheck the fit. 

Check the fit again as your dog becomes more comfortable with the collar.

Do not shave the pet’s neck as this may increase the risk of skin irritation. The collar should 
not be worn for more than 12 hours out of every 24-hour period. Leaving the collar on 
too long could lead to skin irritation.

Temperament Learning

Temperament Learning tracks the number of corrections needed to substantially reduce (and in most cases) 
eliminate the number of nuisance barks. The collar starts at the lowest correction level and increases 
the intensity with each successive bark until the barking stops. This correction level becomes the starting 
level the next time the dog barks. Once your dog has learned to reduce this barking, the initial warning 
corrections are automatically reduced.

NOTE: As a built-in safety feature, if your dog barks 15 times or more within an 80 second period, the bark 
collar will automatically shut off for 3 minutes.

A

B

C

Summary of Contents for PBC00-16446









Reviews: