Customer Care 1 (800) 732-2677
petsafe.com
5
1
Assemble Pet Fountain
Note:
Rinse all of the fountain components
(except for the adaptor) with warm water before
using the pet fountain. This will remove any
residue from the manufacturing process.
1. Take the pump apart by first removing the
blue faceplate. Use your finger to pull up on
the small tab.
2
2. Remove the teardrop-shaped stator by
pulling up on the small lip.
3
3. Use a fingernail to pull out the impeller,
which is held in place magnetically. Clean
the pump parts with warm water and soap.
Reassemble the pump by first inserting
the impeller. Then, replace the stator
and faceplate.
4. Place the pump into the foam filter with the
cord running above it.
4
Summary of Contents for Drinkwell PWW00-13705
Page 11: ...petsafe com 1 1 ...
