6
Key Definitions
Bowl:
The bowl is the foundation of the fountain. The base of the bowl features a notch to hide
the electrical power cord from view.
Lid:
The lid snaps in place over the housing, keeping pets out of the charcoal filter.
Charcoal filter:
The 3-layer filter is made with activated carbon derived from coconut shells.
The charcoal filter absorbs bad tastes and odours as the water passes through and helps keep
the water tasting fresh and more appealing to pets.
Pump Plate:
The pump plate attaches to the pump and secures its placement inside
the bowl.
Pump:
The small aquarium pump can be partially dismantled for cleaning.
THE PUMP IS NOT DISHWASHER SAFE! The pump also features a removable in-line plug for
easy attachment and removal.
Operating Instructions
• Do not use outdoors. Do not run dry. For indoor household use only.
• Do not pull on the electrical power cord to remove the power
adapter from the mains power outlet. To unplug, grasp the power
adapter, not the electrical power cord.
NOTE:
Rinse all fountain parts, including the pump, with warm water before operating the pet
fountain. This will remove any dust or residue that remain in the system from the manufacturing
process. Refer to the “Pump Maintenance” section of this Operating Guide for detailed
instructions on how to properly clean your pump.
1. As with any electrical appliance, check the electrical power cord
for any tears or damage before use.
2. Remove the lid by placing a finger underneath the tab on the
back of the lid and lift up (
Fig. 1
).
3. Rinse the charcoal filter thoroughly under cold water before
placing in the pet fountain. This will remove any loose carbon dust,
which is harmless. A small amount of carbon dust may shed for the
life of the filter. This is normal and not harmful to your pet.
4. Insert the charcoal filter. The filter will fit between the two
triangular slots to the right of the pump. Make sure it is pushed
all the way down and that the black side of the charcoal filter is
facing toward the pump (
Fig. 2
).
5. Place the pet fountain in a desired location. To protect your floor
always use a protective mat, such as a towel or water resistant
placemat. This will help protect your floor from splashing or spills
caused by your pet.
Fig. 2
Fig. 1
