StEP 4. ChECkinG yOur SafEty SyStEMS
Before using this kite, please check the manual supplied with your bar on how
to activate your safety systems and re-attach the release systems used.
We recommend to test the safety system when using the kite for the first time
so you are aware how the system works, how to activate it and how to re-attach
it after activating.
Never be afraid to use it because it can save your life!
We recommend to check if your quick releases are in working order before
every launch!
The safety system works in two steps:
Primary safety - If you need to lose the power of the kite without losing the kite
itself the primary safety release can be used. The kite loses its power but is still
connected to the rider by the safety leash.
Secondary safety release - When the kite is still pulling after using your primary
quick release, use the secondary release on the leash.
Activating the primary quick release
Re-connecting the primary quick release
To activate your primary quick release, pull the red release cuff part down
towards your spreader bar.
Re-connect the primary safety release by placing the pin inside the Centrix
center piece, flipping the pin over and sliding the release cuff over the pin.
Summary of Contents for LEI series
Page 1: ......
