Peter Lynn LEI series, User Manual, Page: 7 / 20

StEP 3. SEttinG uP yOur bar and LinES
Starting downwind of the kite,
unwind your flying lines while walking
downwind. Place your bar on the
ground the wrong way around. Make
sure your leader lines and other parts
of the bar are free of tangles or twists. Hold your lines between your fingers
while walking back toward the kite, to
sort out the flying lines. Place all lines
on the ground. Check that your bridles are free of
tangles and twists. Make sure the pul-
leys are free of sand. Attach the flying lines one by one,
using larkshead knots.
Attaching the top lines to the kite
Make sure you attach your flying lines using a larkshead knot. Place a larkshead
knot in the flying line connector, slide it over the middle knot on the top line
attachment on the bridle and tighten the larkshead as shown.
Attaching the rear lines to the kite
Connect the flying line connector to the rear line attachment and tighten the
larkshead as shown.
BRIDLE
BRIDLE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
FLYING LINE
BRIDLE
BRIDLE
BRIDLE
BRIDLE