Peter electronic VDI-037-3E3-IP66, Quick Start Manual

Page: 7 / 13

6 POWER ON
7 COMMISSION
Operation
Managing the Keypad
The drive is configured and its operation monitored via the
keypad and display.
DOWN
Used to decrease speed in real-time
mode or to decrease parameter values
in parameter edit mode.
START
When in keypad mode, used to Start a
stopped drive or to reverse the direction
of rotation if bi-directional keypad
mode is enabled.
NAVIGATE
Used to display real-time information,
to access and exit parameter edit mode
and to store parameter changes.
UP
Used to increase speed in real-time
mode or to increase parameter values
in parameter edit mode.
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop
a running drive.
Operating Displays
67R3
+

$

3

Drive Stopped /
Disabled Drive is enabled
/ running, display
shows the output
frequency (Hz) Press the Navigate
key for < 1 second.
The display will
show the motor
current (Amps) Press the Navigate
key for < 1 second.
The display will
show the motor
power (kW) If P-10 > 0, pressing
the Navigate key
for < 1 second will
display the motor
speed (RPM)
Changing Parameters
67R3 3 3 3 3
Press and hold the
Navigate key > 2
seconds Use the up and
down keys to
select the required
parameter Press the Navigate
key for < 1 second Adjust the value
using the Up and
Down keys Press for < 1 second
to return to the
parameter menu Press for > 2
seconds to return
to the operating
display
Read Only Parameter Access
67R3 3 3
3 67R3
Press and hold the
Navigate key > 2
seconds Use the up and
down keys to select
P-00 Press the Navigate
key for < 1 second Use the up and
down keys to select
the required Read
Only parameter Press the Navigate
key for < 1 second
to display the value Press and hold the
Navigate key > 2
seconds to return
to the operating
display
Resetting Parameters
3GHI 67R3
To reset parameter values to
their factory default settings,
press and hold Up, Down and
Stop buttons for > 2 seconds.
The display will show “
SGHI ”
Press the Stop key. The
display will show “
VWRS ”
Resetting a Fault
2, 67R3
Press the Stop key. The
display will show “
VWRS ”