DELUXE SOFT STEP II • PG9710SOC
3
ASSEMBLY INSTRUCTIONS
Step 1
Place right panel, part (B) on floor with
PET GEAR
Logo
facing the floor and insert top stair, part (E).
Keep the STRAIGHT EDGE toward the back and rug
facing the top. Make sure there are no gaps between
parts after inserting.
(If inserting part is difficult put a little dish soap on
doweled end before inserting.)
Step 2
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
Step 3
Insert bottom stair, part (F). Note the CURVED SIDE
direction. Make sure there are no gaps between parts
after inserting.
Step 4
Insert riser, part (C). Make sure there are no gaps
between parts after inserting.
E
B
C
F
C
Straight Edge
Curved
Side
