YOUR LoRAIN LoRA
The LoRAIN LoRA consists of one plastic casing containing the
electronics, the battery and the rain gauge. It can be customized
with sensors for precipitation, temperature and a sensor-package for
irrigation and plant protection systems. In the package with the LoRAIN
you will also find, taped to the top of the solar panel, a sticker with a
unique serial number and the keys that grants you the access to the
FieldClimate platform.
On the picture to the right:
LoRAIN LoRA
MAIN PRODUCT VARIATIONS:
• LoRAIN LoRA rain only:
rain gauge only
• LoRAIN LoRA:
rain gauge, air temperature, relative humidity
• LoRAIN LoRA soil:
rain gauge + air temperature, relative hu
WatermarkTM (water tension) + PI54 VWC (Volumetric water content
and soil temperature)
Supported LoRA networks:
The LoRAIN station comes equipped with the the appropriate modem
depending on geographical location of deployment:
•
RN2483 Module
The RN2483 is a fully-certified 868MHz module based on wireless
LoRaWAN technology. This Module utilises a unique spread spectrum
modulation within the sub-GHz band to enable long-range, low power,
and high network capacity. This module supports all European Union
(EU) markets.
• RN2903 Module
The RN2903 is a fully-certified 915 MHz module based on wireless
LoRa® technology. Unlike the RN2483, this module is tailored for USA,
Canada, Australia, Brazil and some countries in South America and Asia
markets. (Contact PI for further clarification).
START-UP THE LoRAIN LoRA
By default, the LoRAIN station comes with a connected Supercapacitor
that collects energy from the connected Solar Panel. Based on the filled
Order-Details-Form, if default parameters were set, the station should
already be in FieldClimate.cable connected to the PC with the TeraTerm
application and connecting the battery.
