~ 5 ~
INSTALLATION
1.
Connect a HDMI source to the transmitting unit PRO-HDMI-CAT-TX.
2.
Connect a HDMI display or projector to the receiving unit PRO-HDMI-CAT-RX.
3.
Connect a Cat-5/5e/6 cable between the transmitting and receiving units.
4.
Make sure this Cat-5/5e/6 cable is tightly connected and not loose.
5.
Plug in 5V DC power supply units to the latch-locking power jack on the both transmitting and
receiving units of PRO-HDMI-CAT.
6.
If you see flickering or blinking image on the display, please adjust the rotary control switch to
improve the cable skew. 0 stands for the strongest HDMI signal level for longest possible
transmission length while 7 stands for the weakest HDMI signal level for short transmission
length. Please adjust the EQ signal level from 7 to 0 and stop turning the rotary switch
whenever the audio/video is playing normally. Inappropriate signal level setting may cause
overpowering issue that would shorten the product life significantly!
Connection Diagram
Cat.X
Cable
HDMI Cable
HDMI
Cat.X
HDMI
HDMI Display
C
R
L
LS
LB
RS
RB
PRO-HDMI-CAT
PRO-HDMI-CAT
