~ 7 ~
EDID LEARNING
For learning EDID from the HDMI display, please follow the instructions below:
Step 1 – Turn on the transmitter PRO-HDMI-CAT-TX.
Step 2 – Dial “
MODE SET”
on the transmitting unit PRO-HDMI-CAT-TX counterclockwise
[ ] to
7
.
Step 3 – Connect the HDMI display to “
HDMI IN
” on the PRO-HDMI-CAT-TX transmitter
with a HDMI cable. The LED on the RJ45 connector of PRO-HDMI-CAT-TX
transmitter will dim and light again, which indicates the EDID learning procedure is
complete.
Step 4 – Dial “
MODE SET”
on the transmitting unit PRO-HDMI-CAT-TX clockwise
[
]
from
7
to 0 (for surround sound) or
1
(for stereo). The most important thing is don’t let
the rotary arrow pass through Mode 5 and Mode 6 which will erase the EDID just
learned and restore to default EDID.
Step
5
–
Unplug the HDMI cable from the display and follow the instruction in
INSTALLATION section to set up the PRO-HDMI-CAT.
