~ 17 ~
DISPLAY SIDE
Method A: Push button for switching input channels
Press the
INPUT SELECT
push button to switch the input source on the respective output port
connected to the receiver units in sequential order. The selected input source will be displayed on
the seven segment display of
INPUT CHANNEL
.
Method B1: IR remote control for switching input channels
Please decide which input channel to be selected by pressing Source Selection 1 to Source
Selection 8. Or you can use left and right
«
button to enter IR control mode and select
the input channel in ascending and descending order respectively. The setting will be effective
in a couple of seconds.
Note
Right ( ) button to switch input source in ascending order (1, 2, 3, 4, 5, 6, 7, 8, 1, 2, ......)
Left ( ) button to switch input source in descending order (1, 8, 7, 6, 5, 4, 3, 2, 1, 2, ......)
Method B2: IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control the HDMI source.
DO NOT press any button more than once within 1 second on the receiver unit INPUT
SELECT and the IR remote control as both devices need about 1 second to communicate with
the router unit to validate the command you sent. Press multiple times within 1 second
segment could lead to unexpected lock-on failure.
Switch input port in descending order*
«
Switch input port in ascending order*
SOURCE SEL. 1
Switch the display channel at the remote site to
input port 1
SOURCE SEL. 2
Switch the display channel at the remote site to
input port 2
SOURCE SEL. 3
Switch the display channel at the remote site to
input port 3
SOURCE SEL. 4
Switch the display channel at the remote site to
input port 4
SOURCE SEL. 5
Switch the display channel at the remote site to
input port 5
SOURCE SEL. 6
Switch the display channel at the remote site to
input port 6
SOURCE SEL. 7
Switch the display channel at the remote site to
input port 7
SOURCE SEL. 8
Switch the display channel at the remote site to
input port 8
—
«
—
«
—
