~ 10 ~
INSTALLATION
Router unit
1.
Connect all sources to HDMI inputs on the PRO-8X8-HDMI-CAT.
2.
Connect each
CHANNEL CONTROL
RJ45 output port on the PRO-8X8-HDMI-CAT to
respective
CHANNEL CONTROL
RJ45 input port on the remote receiver unit.
3.
Connect each
A/V SIGNAL
RJ45 output port on the PRO-8X8-HDMI-CAT to respective
A/V
SIGNAL
RJ45 input port on the remote receiver unit.
4.
Connect IR blaster to the
IR MAIN
jack of PRO-8X8-HDMI-CAT and direct the IR blaster to
the built-in IR sensor of the sources.
5.
Connect the UL AC C13 power cord to the power jack on the PRO-8X8-HDMI-CAT.
6.
Turn on all HDMI sources.
7.
Turn on the PRO-8X8-HDMI-CAT.
Receiver unit
1.
Connect each HDMI output to HDMI displays
2.
Connect each
CHANNEL CONTROL
RJ45 output port on the PRO-8X8-HDMI-CAT to
respective
CHANNEL CONTROL
RJ45 input port on the receiver unit.
3.
Connect each
A/V SIGNAL
RJ45 output port on the PRO-8X8-HDMI-CAT to respective
A/V
SIGNAL
RJ45 input port on the remote receiver unit.
4.
Connect IR receiver and place the IR receiver at the appropriate position that can receive the IR
command signals sent from the users.
5.
Dial the 8-level rotary control switch to adjust the HDMI signal level until the picture and
sound are clear. When adjusting the signal level on the receiver unit, please dial the rotary
control switch from 7 to 0 and stop turning the rotary switch whenever the audio/video is
playing normally. Inappropriate signal level setting may cause overpowering issues that would
shorten the product’s life significantly!
