Section 2
page 2.1
10/95
P/N 81905903440
INSTALLATION
2
Installation
Digital Video
2.1 Introduction
This section details the Cougar Digital Video Routing Switcher installation
procedures. The following topics are discussed:
•
Receipt Inspection
•
Unpacking
•
Location
•
Mounting
•
Cabling
•
Level Code (Strobe) Selection
•
Input/Output Coding Selection
•
System Controller Card Installation
•
PS70V Setting Line Voltage
•
PS70V Power Supply Installation
•
32X32 Digital Video Matrix Card Installation
•
Rear Panel Connectors
•
System Connections
General
If specified when ordered, the Cougar Digital Video Frame will be config-
ured for the intended system at the factory. Before attempting to install
any frame, matrix card, controller card, or power supply; this section
should be read carefully.
NOTICE
THE COUGAR DIGITAL VIDEO ROUTING SWITCHER CONTAINS STATIC SENSITIVE
DEVICES. CARE SHOULD BE USED WHEN IT IS NECESSARY TO HANDLE THE
INTERNAL CIRCUIT CARDS. IT IS RECOMMENDED THAT A GROUND WRIST STRAP
AND GROUNDING MAT BE USED BEFORE ATTEMPTING ANY EQUIPMENT INSTAL-
LATIONS.
2.2 Receipt Inspection
The Cougar Digital Video Routing Switcher was tested and inspected
prior to leaving the factory. Upon receipt, inspect the equipment for ship-
ping damage. If any damage is found, contact the carrier immediately and
save all packing material.
