NOTES
A
PPENDIX
F: S
PECIFICATIONS
Power Requirements
Voltage
PSU: 90..240VAC-0.5A-47..63Hz/6VDC-2000 mA
Power required
Local Unit: approx. 8W
Remote Unit approx. 8W
Voltage
PSU: 90..240VAC-0.5A-47..63Hz/5VDC-2400 mA
Power required
approx. 10W
Interface
(Depending on type of device)
Monitor
VGA (res.: 1600x1200@60Hz, plug&play supported)
all lower resolutions at least with 75Hz
DVI (res.: 1600x1200@60Hz, plug&play supported)
Local Access
max. resolution VGA: 1600x1200, DVI: 1280x1024
output depends on input type VGA or DVI
Maximum Length of Interconnection Cable
(Without reboost)
62.5µm/50µm Multimode
650ft (200m) @62,5µ
1300ft (400m) @50µ
9µm Singlemode
6 ¼ miles (10km)
Optical Elements – Singlemode
Center Wavelength
1300nm
Total Output Power
<2000µW
(as defined by IEC: 50mm aperture at 10cm distance)
<180µW
(as defined by FDA: 7mm aperture at 20cm distance)
Beam Divergence
4°
Required Labels
FDA: Complies with 21 CFR 1040.10 and 1040.11
IEC: 60825-1 Class 1 Laser Product
Transmitter Electro-Optical Characteristics (typical)
Launched power (Average) into
singlemode fiber 9µm diameter
-3 dBm (-11dBm minimum)
Receiver Electro-Optical Characteristics (typical)
Sensitivity (Average Power)
-22dBm (-20dBm maximum)
Optical budget total
-18dBm (-8dBm minimum)
