23
The device configuration screen includes three major sections and several sub-sections that
are used to configure the device for operation with a vehicle and to extract the desired
engine parameters.
Device configuration sub- headings in tabs: click on a tab to move to the heading
topic.
Global parameters (device specific):
o
Engine start up – delay time before device begins interrogating ECM
o
Trip Finish Timeout – delay time before device turns off after ignition is turned
off.
SAEJ1979 Service Code 01 PID parameters categorized under Driving Conditions,
Air/Fuel Mixture, Emission Control, and Diagnostics.
Quick one-button device configuration tasks that are stored on the SD memory card.
o
Save the configuration file (*.CFG) on your local PC that defines this device
configuration.
o
Write the configuration file (*.CFG) to the SD memory card so that when it is
inserted into the CanDrive-CD device, the device reads the card and
configures the device according to the configuration file parameters.
o
Other functions:
Load from file: Load a previously saved *.CFG file on the PC and view
the PID configuration.
Read from memory card: With a valid memory card in the PC, read
back the *.CFG file from the card to view the PID configuration.
Reset to Defaults: Reset the *.CFG file to the default number of PIDs
(9).
3.2.3 Tools Screen
Figure 25: OttoView™ Driver Tracking System Tools Screen
There are five major sections within the Tools screen: