
7.3 - OFF (disabling the thermostat)
This setting has the purpose of locking thermostat functions when
heating or cooling must remain off.
in the event of low batteries, the symbol will flash on the display.
2-
The display shows
, to indicate that the thermostat is disabled and
OFF
all functions are inactive; the display only shows room temperature
reading and the Antifreeze protection temperature set (for winter mode).
in WINTER mode with antifreeze temperature disabled or in Summer mode, the temperature set will not be visible
3-
/ OK
Press key
.
to reactivate the thermostat
1-
OK
In the condition of normal operation of the thermostat, press the
/
button briefly to set the thermostat to
and consequently
OFF
«Switch
off the system»
.
/OK
Room temperature
Antifreeze protection temperature
(if deactivated, not visible)
-
SET REG
(selection of temperature control mode)
-
SET UNIT
(selection of temperature unit of measure °C/°F)
-
SET CORR
(correction of detected room temperature)
-
SET BLOC
(it lets you limit the value of set temperature points)
-
POMP ON
(disabling / enabling the descaling function)
-
CONTRAST
(to change display contrast)
-
PASS UT
(to restrict the use of user and/or installer functions
of the thermostat)
-
FACTORY
(
RESET operation)
-
INFO
(information about the firmware version installed)
PASS UT
(set user password)
Installer or skilled user menu:
User Menu:
T
STAG SET
(Winter or Summer mode)
SET TEMP
(modification or disabling of Set antifreeze temperature)
IT
7 - USE OF THE THERMOSTAT
8 - STRUCTURE OF THE MAIN MENUS (use and configuration)
33
EN
SET PROG