Perry Electric 1IC 7054, Manual

Page: 63 / 96

«EMD» - External
memory device
This feature allows you to view information about the version of software installed on the product.
1. From the sub-menu confirm with
INFO SET
OK
.
2. Information about the version of software is displayed.
3. Exit and return to the home screen by pressing the
key three times.
MENU
The EMD is an external memory card that can handle ON/OFF programs, including the «Holiday» programs. 45
Note: the EMD is the programming key.
1. Insert the EMD: the display shows the memory EMD
SET
management sub-menu.
2. Confirm with .
OK
3. Use the keys to select the desired
sub-menu (see the table at the side).
4. Confirm each selection with .
OK
Note: if the warning symbol appears on the home screen, the corresponding error code
Err2
(twilight sensor fault) is displayed when this sub-menu is accessed. This error occurs when the
sensor does not detect a value above the threshold of the 5 LUX for over 7 days.
In this case, verify that the sensor is not faulty, disconnected or obscured.
The warning disappears automatically when the sensor is reset.
Even in the presence of the
warning the LUX programs will still run.
Sub-menu Function Notes
Executes programs directly
from the EMD
The programs are only
executed by the EMD
Saves all the device memory
to the EMD
Overwrites all existing
programs on the EMD
Copies all the contents from the
EMD to the device memory Overwrites all existing
programs on the device
Reads programs from the EMD
Shows only programs on
the EMD
Copies Holiday programs
from the device to the EMD
Overwrites all Holiday
programs on the EMD
Copies Holiday programs
from the EMD to the device
Overwrites all Holiday
programs on the device
Deletes the programs on the EMD
Permanently deletes all the
EMD memory
9.8) INFO
9.9) EXTERNAL MEMORY DEVICE (EMD)
OKAY will appear on the display for a few
seconds, which indicates the operation was
successful.
excluding the programs on the device
63
EN