2.1) Enabling the twilight sensor
(this is only possible with the outdoor twilight sensor installed and connected properly to the digital device
powered by 230V~ mains voltage)
•
the display of the digital switch shows
; use the keys to select
SENSOR L
SENSOR L
OFF
ON
.
Confirm with
.
OK
•
The LUX value read in real-time by the sensor is displayed (
).
CURRENT
Confirm with
.
OK
appears on the display for a few seconds after which it moves to the main screen of normal
OKAY
operation of the device
.
Note:
Current
if the sensor is not connected, is not working or the read
LUX value is less than 5 LUX,
Current
0000
is displayed and the LUX value (example:
) flashes together with the
symbol (by pressing
OK
the sensor cannot be activated). Check the correct installation of the sensor and try activating once
again
.
Even in this fault condition it is possible to exit (without activating the sensor) by pressing the
key and
MENU
the main normal operation screen will appear on the display.
2
.1.1) Disabling the twilight sensor
Execute a
(para. 1.7.3), confirm all the previously entered settings with the
key until the
Reset
OK
screen is displayed ; disable it by pressing one of the keys and confirm with the
key.
OK
The LUX value read in real-time by the sensor can be displayed at any time (
).
CURRENT
Press
from the main screen to display Lux; press
again to exit (refer to par. 1.7.1).
OK
OK
43
EN
After confirming the desired summer/winter time (Chap. 2):
EN
Summary of Contents for 1IC 7054
Page 96: ......
