Perrot Water Control+ SC, Operation And Maintenance Manual

Page: 23 / 34

e.doc Rev. 07.07.2015 Seite ‐ Page 53 / 64
Perrot REGNERBAU CALW GmbH Industriestraße 19 ‐ 29 / D ‐ 75382 Althengstett / Germany
Telefon : 0049 ‐ 7051 ‐ 162 ‐ 0 / Fax : 0049 ‐ 7051 ‐ 162–133
E ‐ mail: perrot@perrot.de / E ‐ mail Konstruktion : technik@perrot.de

Press and to select „Sensor afterrun times“
Press to confirm.

To select a station, press and , then choose right or left side.

Use or to set sensor afterrun time.

Sensor afterrun time may be adjusted from 0 ‐ 15 seconds. Factory setting: 5 seconds.

Press to save changes and return to previous menu.

Adjustment range: 0 ‐ 15 sec.

Factory setting: 5 sec.
Sensor time
The sensor time is used for monitoring. If the controller does not receive any signal from an active
SC ‐ station during the time set, it will stop this station and continue with the next station.

Use and to select „Sensor time“

Use or to increase/decrease the selected digit and press to save changes
Adjustment range: 60 – 150 seconds
Factory setting: 90 seconds