32
Settings and adjustment
User Manual VS
Leg rest seen from behind.
Settings and adjustment
Foot plate - Angle adjustment
The foot plate angle can be adjusted by
screwing the nuts (2) on the foot plate
adjustment screws in or out, see photo
on right.
Foot plate - Height adjustment.
1.
Releast the two locking screws (1)
on the foot plate, see photo.
2.
Adjust the foot plate to the desired
height.
3.
Retighten the screws.
4.
Where necessary, on seats without
standing operation function, adjust
the height of support wheels so
the leg rest does not hit the ground
during elevation.
Reversing the foot plate fixing.
If further adjustment of foot plate height
is necessary, it is possible to reverse the
fixing, which will enable the foot plate to
be set higher up.
1.
Unscrew the support wheels; on
seats with standing operation they
are mounted with two screws on
ei ther side of the leg rest, while on
seats without standing operation they
are mounted on the rear edge of the
foot plate, see photo.
Support wheel fixing on seat
without standing operation function.
1
2
Support wheel fixing on seat
with standing operation function.
Summary of Contents for vs
