Permobil Trax, Service Manual

Page: 20 / 64

Changing the drive motor
20
Left motor
10. Unscrew the sheet metal mounting where
the jack panel is mounted. Tip up the
electronics and the jack panel so that
there is room to remove the left drive
assembly. See the figure to the right.
Electrical extension:
If the wheelchair is equipped with
electrical extension, it must be extended
to its outermost position. Remove the
rear extension adjustment device from
the mounting. Then press the front wheel
assembly in approximately 10 cm.
Fold the adjustment device motor (electrical
extension) away from the drive assembly
in order to be able to remove the drive
assembly
.
11. Loosen the three screws of the drive
assembly.
12. Lift the drive assembly out of the chassis.
Loosen the motor
Lift out the motor
Bracket to
the jack
panel.