Permobil STREET Owner'S Manual Download Page 84

Page: 84 / 98

Owner’s Manual Street

Maintenance and Repairs

The main fuse is accessible via an outlet in the chassis cover, see picture below.

Check the decal to see what the ON and OFF positions are. Fold up the

rubber protector and flip the switch towards the direction indicated by the

sticker.

Fold the rubber protector back.

Resetting of main fuse/battery cut-out

The main fuse also functions as a battery cut-out, but in the operating instruc-

tions it is generallly called the main fuse.
Replacement of the main fuse is normally not necessary as it is of the automatic

type that can be reset when it has been thrown. The resetting is done by placing

the switch in the ”ON” position.

Location of the main fuse

Main fuse in “ON” position

Always shut off the power supply on the control panel before switching off the power with the

main fuse.

CAUTION

A thrown main fuse often involves larger electrical faults. The cause should be checked carefully

before the switch is reset. Always contact an authorized serviceman or Permobil when in doubt.

WARNING

Summary of Contents for STREET



































































































Search results

Summary of Contents for STREET

Reviews:

Related manuals for STREET

Brands by name

Popular brands

Permobil STREET, Owner'S Manual

Search results

Summary of Contents for STREET

Reviews:

Related manuals for STREET

Brands by name

Popular brands