6
ROHO nexus SPIRIT Cushion Operation Manual
Warnings:
-
Cleaning and disinfecting are separate processes. Cleaning must precede disinfection. Before use
by a different individual: clean, disinfect, and check product for proper functioning.
-
Follow all manufacturer bleach container and germicidal disinfectant safety guidelines.
-
Note About Sterilization: High temperatures accelerate aging and will damage the product
assembly. The products featured in this manual are not packaged in a sterile condition, nor are
they intended or required to be sterilized prior to use. If institution protocol demands sterilization:
First, follow the cleaning and disinfecting instructions; then, open the inflation valve and use the
lowest possible sterilizing temperature, but not to exceed 70°C (158°F), for the shortest time
possible. DO NOT autoclave.
Cover Care
Note:
Before cleaning and disinfecting, remove the cover from the cushion. Remove hook fastener pieces
from the bottom of the cover.
To Clean the Cover:
Machine wash in cold water (30°C) with mild detergent, gentle
cycle, or wipe clean with neutral detergent and cold water. Tumble dry low.
30C
30C
To Disinfect the Cover:
Hand wash in cold water (30°C) using 1 part
household liquid bleach per 9 parts water, then rinse thoroughly. Or
machine wash in hot water (60°C). Tumble dry low.
60C
30C
1:9
+
or
Cushion Care
Warning: Inflation valve(s) must be closed. DO NOT allow water or cleaning solution to enter the
cushion insert.
Cautions: DO NOT machine wash or machine dry the cushion insert or the contoured foam base.
Use of the following may cause damage to the cushion: abrasives (steel wool, scouring pads); caustic,
automatic dishwasher detergents; cleaning products that contain petroleum or organic solvents, including
acetone, toluene, Methyl Ethyl Ketone (MEK), naphtha, dry cleaning fluid, adhesive remover; oil-based
lotions, lanolin, or phenolic-based disinfectants; ozone gas; ultraviolet light cleaning methods.
To Clean the Cushion Insert:
Carefully remove the cushion insert from the contoured
foam base. Close the inflation valve. Hand wash, using mild liquid hand soap, hand
dishwashing liquid, laundry detergent, or a multipurpose detergent (follow product
label instructions.) Gently scrub all cushion surfaces, using a soft plastic bristle
brush, a sponge or a cloth. Rinse with clean water. Air dry. DO NOT expose to direct
sunlight.
Caution: Rinse thoroughly. Detergent residue may cause air cells to stick together.
To Disinfect the Cushion Insert:
Repeat the cleaning instructions, using 1
part household liquid bleach per 9 parts water. Keep the product wet with the
bleach solution for 10 minutes. Rinse thoroughly with clean water. Air dry.
1:9
+
Contoured Foam Base Care
To Clean the Contoured Foam Base:
Remove the cover. Wipe gently with a cloth
dampened with water and a household detergent. Rinse cloth and re-wipe. Allow
foam to air dry thoroughly before putting the cover on.
Wipe
with a
damp
cloth.
Warning: Disinfectants are not effective on porous surfaces such as foam. If the foam
portion of the product becomes soiled or contaminated, DO NOT use with multiple individuals.
Cleaning and Disinfecting