Permobil Koala, Service Manual

Page: 20 / 32

20
Pilot Motor Controller
Removal
1. Raise the seat to its highest position. To
operate the seat lift manually, see page 7.
2. Switch off the main switch on the control panel.
3. Put the circuit breaker to the “OFF” position,
see page 23, fig. 52.
4. Remove the seat lift cover and chassis cover,
see page 8.
5. Lift the Pilot Motor Controller out of its holder,
see fig. 42-43.
6. Disconnect the electrical connectors from the
output stage; note their locations for refitting,
see fig. 44.
Fitting
Fitting is the reverse procedure.
Pilot Motor Controller
Fig. 42. The Pilot Motor Controller sits in
its holder without any fixings.
Fig. 43. Lift up the Pilot Motor Controller.
Fig. 44. Electrical connectors for the
Pilot Motor Controller.