Permobil Koala, Service Manual

Page: 15 / 32

15
Magnetic brake
5. Fit the rubber seal, with the drainage hole at the
bottom. Note the position of the brake release
arm, fit the brake so that the brake release arm is
aligned with motor cable mounting. Secure the
magnetic brake using the three bolts.
6. Refit the drive motor, see fig. 21 on page 12.
7. Refit the drive wheel, see page 10.
8. Fit the brake release cable, see fig. 28.
9. Connect the magnetic brake and drive motor
electrical connectors, see fig. 29.
10. Fit the battery cover and chassis cover,
see page 8.
Fig. 28. Fit the brake release cable.
Fig. 27. Use one of the bolts to align the parts
with one another. Fit the rubber seal.
Fig. 29. Magnetic brake and drive motor
electrical connectors.