Permobil Koala, Service Manual

Page: 18 / 32

18
Seat lift
Seat lift
Actuators
Removal
1. Raise the seat to its highest position. To
operate the seat lift manually, see page 7.
2. Switch off the main switch on the control panel.
3. Put the circuit breaker to the “OFF” position,
see page 23, fig. 52.
4. Remove the battery cover and chassis cover,
see page 8.
5. Remove the seat cushion and seat plate,
see fig. 35.
6. Remove the seat lift actuators front fixing bolt,
see fig. 36.
7. Lift the seat manually to its highest position.
Ensure that the safety stop is in place, see fig. 37.
8. Disconnect the connector in the seat lift
actuator cable.
9. Remove the seat lift actuator rear fixing
bolt, see fig. 38.
Fitting
Fitting is the reverse procedure.
Fig. 35. The seat plate is attached by three bolts.
Fig. 36. Seat lift mechanism front fixing.
Fig. 37. Seat lift safety stop. Fig. 38. Seat lift actuators rear fixing.
The seat is heavy. Exercise caution when the
bolt is removed.