36
Emergency operation of seat functions
Emergency operation of seat functions
If any of the electric seat functions cannot be operated in the normal way because of a fault other than
discharged batteries or a faulty actuator, the function can be operated manually using the emergency
operation cable supplied.
Connector
for
connection
to charging
socket
Control lever for
emergency
operation
Connector for
connection to
actuator
Connecting the emergency operation
cable
Emergency operation must only be used in
emergencies, and then with great care. When the seat
is operated in the emergency mode, all safety
functions in the control system are bypassed. There is
a risk of crushing and a risk of damage to the
wheelchair.
Never drive the wheelchair and use the emergency
operation cable at the same time.
Following emergency operation, the relevant actuator
must be recalibrated. Detailed information on
calibration is available in the technical manual for the
ICS control system.
1.
Remove the chassis cover. See page 10.
2.
Connect the emergency operation cable to
the charging socket. See illustration.
Connecting the emergency operation cable to the
charging socket.
1. General Module for “Seat angle”.
2. General Module for “Seat-to-floor function”.
3. General Module for “Seat lift”.
WARNING
1
2
3
Summary of Contents for K450
