15
Front wheels
Fitting a tire to a split rim.
Front wheels
Taking the rim apart
The rim can be taken apart to make it possible to fit/remove solid or pneumatic tires.
1.
Remove the wheel in question from the wheelchair. See the previous page.
2.
If the tire is pneumatic, release the air.
1
Locking nut, M6 8 Fe/Zn 5 C1
2
Rim, interior. 210x65
3
.
Spacer
4
Inner tube 210x65 TR87 (Pneumatic tires only)
5
Tire, air 210x65 (2.50” x 3”)
Tire, Solid 210x65 (2.50” x 3”)
6
Rim, exterior. 210x65
7
Rim, exterior. 210x65
8
Screw, M6x35 8.8 Fe/Zn 5 C1
Item
Description
2
1
8
Ensure that pneumatic tires are not pressurized before the rim is taken apart, otherwise there is a risk of personal injury.
3.
Remove the three screws holding the two halves of the rim together (see illustration).
4.
Take the rim apart.
Fitting
Fit in the reverse order.
Use a torque wrench to tighten the screws holding the rim halves in place to 7.2 ft-lbs (9.8 Nm).
The recommended tire pressure for pneumatic tires is 36 psi
(250 kPa). Overfilling entails a risk of explosion.
The incorrect tire pressure may result in lower stability and
maneuverability. So check regularly that the tires have the correct
pressure.
3
4
5
6
7
Do not use an impact wrench for the tightening torque.
WARNING
NOTE
WARNING
Summary of Contents for K450
