Permobil K450, Service Manual

Page: 10 / 72

10
Covers
Each of the rear wings is held in place
with three screws.
The chassis cover is held in place
with two screws.
Covers
Removing the rear wings
A rear wing is fitted to the right or left side of the
chassis. Removal/fitting is the same on both sides.
1. Remove the three screws that secure the
cover. See illustration.
2. Remove the rear wing by lifting it straight up.
When removing the left rear wing, place the
brake release’s release control in the released
position to facilitate removal.
Removing the chassis cover
1. Remove the bumper, which is held in place
with two screws. See illustration.
2. Remove the two screws holding the chassis
cover. See illustration.
3. Remove the chassis cover by pulling it straight
back.