Permobil Hälsa Bed Owner’s Manual
3 – Connect the electrical systems
www.permobil.ca
15
3.2 - Temporarily remove the cable separator
To make the electrical connections, you must temporarily remove the cable separator from the
bed’s central motor. The cable separator is snapped in on each end of the underside of the motor.
Overview
Tool required:
flat head screwdriver
STEPS
1 -
Locate where the cable separator is connected on one side of the motor.
2 -
While pushing in with a flat head screwdriver, push down until you can swing the cable
separator out.
3 -
Repeat on the other side of the motor so you can remove the cable separator completely.
PUSH IN WITH A
FLAT HEAD
SCREWDRIVER
PUSH
DOWN
WHERE CABLE SEPARATOR IS
SNAPPED IN UNDERNEATH
(LEFT SIDE IS UNDERNEATH)
SWING
OUT
CABLE
SEPARATOR
Summary of Contents for Halsa
Page 1: ...H lsa Bed Owner s Manual...
