Permobil F3 Corpus User Manual Download

Page: 92 / 274

F3 Corpus

Figure 59. The Bluetooth® Device screen from which
paired devices are chosen.

If more than one Bluetooth® device is paired and enabled, a screen
will appear where a Bluetooth® device can be selected for
connection and use.

If only one Bluetooth® device is enabled, it will be shown directly
on the screen.

Switch between the devices by nudging the joystick forwards or
backwards.

Select the device by nudging right.

Figure 60. A selected Bluetooth® device.

When a Bluetooth® device is selected, the screen will show an icon
representing the chosen device type.

If only one Bluetooth® device is enabled, this screen will appear as
soon as Bluetooth® mode is activated.

Summary of Contents for F3 Corpus



















































































































































































































































































Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands

Permobil F3 Corpus, User Manual

Search results

Summary of Contents for F3 Corpus

Reviews:

Related manuals for F3 Corpus

Brands by name

Popular brands