19
Changing the carbon-brush in
the drive motor
Removal
1.
Remove the drive motor. See page 15.
2.
Remove the motor's cables from the
coupling box.
3.
Remove the magnetic brake.
4.
Mark the stator's position against both ends
with a small mark before loosening the nuts.
It is important for the function of the motor
that the parts are assembled precisely
without being moved away from the original
position.
5.
Loosen two nuts and pull off the motor end.
Press the cable gland off the motor end.
6.
Remove the brush holder completely.
Changing the carbon-brush in the drive motor
Marking
Do not
divide
here
