Changing the batteries
1. Place the wheelchair on a level base.
2. Raise the seat lift to its highest position. If the batteries are discharged, the
seat must raised manually. This is done by removing the seat cushion and
the plastic plug. Then use the enclosed seat lift crank and crank the seat up.
3. Switch off the main power switch.
4. Loosen the battery covers and the rear cover.
NB:
Take care when removing the rear cover. The rear light cables in the
cover are firmly connected to the electronics.
5. Disconnect the battery connections. Disconnect the positive poles first and
then the negative poles.
Po
Po
Negative –
Negative –
6. Lift out the batteries.
7. Insert two new batteries.
NB: Position.
8. Connect the battery connections, first the negative poles and then the
positive poles.
Front
Rear
Fig. 54. Battery connections
Owner’s Manual Chairman HD
Repairs
Page 39
Summary of Contents for Chairman HD
