Permobil Chairman HD Owner'S Manual Download Page 15

Page: 15 / 49

Owner’s Manual Chairman HD

Design and Functions

Page 16

Joystick
You use the joystick to control the for-
ward and backward speed, to steer and
to brake.

You can control the speed steplessly by
moving the joystick forwards or back-
wards. The speed is directly proportional
to the movement of the joystick (small
movement for low speed – large move-
ment for high speed).

You steer the chair by moving the joystick
to one side or the other.

The brakes come on when you move the
joystick back to the neutral position or
release it completely.

Fig. 20. Joystick

Lights
When you press the switch, the wheel-
chair lights come on. Press switch
again to turn off lights.

Fig. 18. Lights

Indicators
When you press the right or left arrow,
the indicators are activated. Press
again to turn off indicators.

Fig. 19. Indicators

Summary of Contents for Chairman HD


















































Search results

Summary of Contents for Chairman HD

Reviews:

Related manuals for Chairman HD

Brands by name

Popular brands

Permobil Chairman HD, Owner'S Manual

Search results

Summary of Contents for Chairman HD

Reviews:

Related manuals for Chairman HD

Brands by name

Popular brands