Page: 2/3
Technical manual, 8 Channel IR Receiver
Document Number: 205316-UK-0 Edition 1 2009-11
Installation of the Receiver
This infrared receiver needs to be installed in a dry place by a skilled technician who is
familiar with installing home automation devices.
All electrical connections are done using connectors. This minimizes the installation time
and provides a fast switch of the module in case a replacement is necessary.
•
Mount the receiver with the connectors down using the Mounting Holes.
•
The receiver has eight voltage-free relay switches which are connected with a
removable terminal block. Max resistive load 1A at 24 V DC/AC or inductive load
0.5 A at 24V DC. When connecting inductive load for instance motors and relays,
an interference suppression device should be used.
•
Connect the supplied power supply (9VDC). The receiver accepts 9..24V (voltages
above 15V are not recommended because of excessive power consumption).
•
Internal 36kHz Carrier Receiver (0.35mW/m
sensitivity)
•
Possibility to connect a remote infra red sensor using the 3.5mm jack connection.
REMARK: For switching higher tensions or higher power, do always use an
auxiliary relay (e.g. for switching mains voltage).
