Rev 02, 09/21
Perma Pure LLC
• A Halma Company • [email protected] • www.permapure.com
Telephone: 7
32-244-
0010 • Toll Free: 800
-337-
3762 • Fax:
7
32-244-8140
1
001 New Hampshire Ave.,
L
akewood, NJ 08701 USA
IMPORTANT
SAFETY
WARNINGS
Please be sure to review the following basic safety procedures. These procedures represent the MINIMUM
requirements to operate the equipment safely. It is the ultimate responsibility of the operator to ensure
proper safety practices are utilized at the point of operation.
NEVER attempt to operate this equipment in an explosive, wet, or otherwise hazardous area.
NEVER exceed any specified rating for the equipment. Temperature and pressure ratings must be closely
observed and not exceeded. Voltage rating of the equipment MUST match the rating on the data label.
Please make sure that it matches before powering up the equipment.
Condensate is potentially dangerous. NEVER handle drain lines, impingers or any other item that may have
come in contact with the gas stream or any hazardous material, without adequate personal protective
equipment. ALWAYS assume that any liquid present is hazardous.
Sample gas is potentially dangerous. A leak test is recommended at initial start-up and as often as necessary
to maintain a safe working environment around the equipment. The gas stream exhaust must exit away from
all personnel to prevent dangerous exposure.
NEVER operate the equipment with any part of the enclosure unsecured. All operated doors and covers must
be in place and secured prior to operation. Electrical current may be present behind covers or doors, even if
tools are not necessary to access these components.
NEVER attempt service on this equipment without first disconnecting all energy sources. Repair of this
equipment should only be done by properly trained personnel that are familiar with the potential risks
involved with servicing of the equipment.
NEVER operate this equipment if it is visibly damaged or the possibility exists that it may have been
damaged.
The use of components that have not been purchased through an authorized Perma Pure dealer or directly
from Perma Pure may compromise the safety of the operator. Additionally, use of non-authorized
components may change the operating characteristics of this equipment. Any changes to the equipment,
that modify its operation in any way, are dangerous, and are strictly prohibited.
Read the entire operating manual before attempting to set up or operate the equipment.
Please heed all warning labels on the equipment. They are there to remind you of possible hazardous
conditions.
Verify the integrity of any connections that are made to the unit.
Verify that the unit is plumbed properly to operate effectively.
