11
Operation & Installation Manual
Signature Series Beer Dispensers (HP15, HP24 and HP48 models)
TOE PLATE INSTALLATION
When the unit is secured in place, install the louvered toe plate.
Secure louvered toe plate by snapping the latch into the latch
catch on the unit. Refer to Figure 9 (below) for Toe Plate Installation
Illustration and Figures 10 (page 12) and 11 (page 13) for Toe Plate
Wood Overlay template.
CAUTION
The louvered toe plate must be removed to service the unit. The
floor cannot interfere with removal. The louvered sections must
not be covered or obstructed to prevent proper air circulation.
I
MPORTANT NOTE:
To achieve maximum performance, interior
louver openings and fan guard openings should never be
obstructed.
SHELVING
HP15TS Single Door Beer Dispenser
Shelving not available
HP24TS Single Door Beer Dispenser
Shelving not available
HP48RT Two Door Refrigerator/Beer Dispenser
The two door refrigerator/beer dispenser (HP48RT) comes standard
with two full-extension black vinyl-coated pullout shelves on the
refrigerator side. Shelving not available on beer dispenser side.
HP48RT Drawer/Door Refrigerator/Beer Dispenser
Shelving not available
Figure 9- Toe Plate Installation
