Perlick Residential Refrigeration, User Manual, Page: 4 / 50

www.bringperlickhome.com
4
ILLUSTRATION 1. INSTALLATION SPECIFICATIONS
150° max swing
on inner doors of
a multi-door unit
71 7/8"
50" Area in which electrical
outlet must be located
13 3/32"
Same for Two and
Three door units
13 1/16" same on
both sides of unit
5 3/16" minimum clearance
required if installing in a corner
*5 3/4 for custom wood overlay
door
-All electrical instructions
assume that outlet is located
4-10 inches from floor
-Floor must be level in area of
installation, leg levelers are meant
as a means of fine tuning, not
recommended for making up
differences in the floor surpassing
1/2 inch
-When moving the units into place
take care to protect the floor as
necessary with cardboard, rugs, etc.
-Never attempt to move unit without
at least one other person present
-Always secure doors shut prior to
moving the unit
Finished rough opening requirements
*Height-----------------34 1/2 inches
*Depth------------------24 inches
*same across all units
One door width------24 inches
Two door width------48 inches
Three door width----72 inches
NOTE:
34 3/32"
105° max swing
for custom wood overlay
doors
47 7/8"
50" Area in which electrical
outlet must be located
Top View
Three Door
Top View
Two Door
recommended minimum swing.
Max swing is 175° on single door
and end cabinets on multi-door units
22 3/4"
50" Area in which electrical outlet
must be located
23 7/8"
100°
25" Min Clearance
for door swing
Top View
Single Door