background image

Minimum VESA pattern: 200mm/8 in.(W)x100mm/4in.(H)

If your TV VESA is greater than 600x400 mm/24x16 in. or less than VESA 

100x100mm/4x4in., this TV tripod stand is NOT compatible.

If this TV tripod stand is NOT compatible, please contact customer 

service at [email protected] to find a compatible product.

MAX:600mm/24in.

MAX:400mm/16in.

• Check to assure that all components were received undamaged. Do 
not use damaged or defective parts. lf you require replacement parts, 
contact customer service at [email protected].

• Install and operate this product with care. Please read this instruction 
before beginning the installation, and carefully follow all instructions 
contained herein. Use proper tools during installation.

• If you do not understand the instructions or have any concerns or 
questions, please contact customer service at supportus@per-
lesmith.com. 

• Do not use this product for any purpose that is not explicitly speci-

fied in this manual. Do not exceed weight capacity. We cannot be 

liable for damage or injury caused by improper mounting, incorrect 
assembly or inappropriate use.

TIP OVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIP OVER. 
TO HELP PREVENT TIP OVER:

• 

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON 

ANY PART OF TV OR TV STAND.

 USE TIP OVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIP OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT 
ELIMINATE RISK OF TIP OVER.

Check the VESA Pattern of TV before the Installation

100mm ≈ 4in.

200mm ≈ 7 7/8in.

300mm ≈ 11 3/4in.

400mm ≈ 15 3/4in.

600mm ≈ 23 6/10 in.

Summary of Contents for PSTM2









Reviews: