Warning:
After adjusting the pole to
desired height, insert the latch
[S] to the holes on the upper
pole. Fasten the knob [K1] to
hold upper pole.
Tighten the knob
to secure the
head assembly.
in.
mm
STEP 1 Adjust the Height of Pole
STEP 2 Secure the Head Assembly with TV Plate to Pole
Assembly
K1
S
600mm
23.6in.
1. Loosen the lower knob.
2. Adjust the distance between each
feet to be 600mm/23.6in.
3. Tighten the lower knob
Note:
It is recommended to
align the center of the TV
plate with one foot of the
tripod stand
