Perle S-1110HP-XT, Manual

Page: 14 / 17

Single Mode / Single Fiber
Connect copper ports over a single fiber strand ( also referred to as “Bi-Directional” BiDi )
When Single Strand fiber is used, a pair of Single Fiber Media Converters is needed for the copper to fiber conversion.
Perle Single Fiber Media Converters are also referred to as “Up/Down” models. For example the S-1110HP-SC05U (“Up”)
and S-1110HP-SC05D (“Down”), shown below, must be used in pairs. An “Up” must be matched with a “Down” peer to
deal with transmit and receive frequencies separately.
S-1110HP-SC05US-1110HP-SC05D
The majority of installations for single mode fiber media converters are of the “dual connector” or “dual fiber” type where
one fiber connection is used for transmit, the other for receive. These are physically “crossed” to match up the
Transmit/Receive links.
However, to reduce costs, or where there are limits on available fiber, WDM technology may be utilized. WDM uses
separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact
that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength.
Thus, a single fiber can carry many separate wavelength signals or channels simultaneously.
So remember, if Single Strand fiber is used, you will need an “Up” Media Converter on one side and a “Down” Media
Converter on the other for copper to fiber conversion.
Select a Model to obtain a Part Number - S-1110HP-XT Hi-PoE
Model
Fiber Port
Connector
Type
Transmit
(dBm) Receive
(dBm)
Power
Budget
(dBm)
Wavelength
(nm) Fiber
Type
Core
Size
(um) Modal
Bandwidth
(MHz*Km)
Operating
Distance
Min Max Min Max
S-
1110HP-
SC05-XT Dual SC 1000Base-
SX -9.5 -4.0 -17 -3.0 7.5 850 MMF 62.5 160 220 m
(722 ft)
62.5 200 275 m
(902 ft)
50 400 500 m
(1,640 ft)
50 500 550 m
(1,804 ft)
50 2000 1000 m
(3281 ft)
S-
1110HP- Dual ST 1000Base-
SX -9.5 -4.0 -17 -3.0 7.5 850 MMF 62.5 160 220 m
(722 ft)