Perle PoE/PoE+ 10/100/1000 Ethernet Media Converter
Installation Guide
2
Overview
This document contains instructions necessary for the installation and operation of
the Perle Standalone PoE/PoE+ 10/100/1000 rate converting Media Converters (S-
1110P). These products have the ability to convert 10/100/1000Base-T cable
connections (copper) to 100/1000Base-X connections (fiber). The Perle media
converters function as a PoE switch, and support a variety of port configurations,
including single or dual UTP and fiber ports. These media converters function as
Power Sourcing Equipment (PSE) and can power either one or two Powered
Devices (PDs) using standard UTP cables that carry Ethernet data. The S-1110P
models are compatible with Powered Devices that comply with the IEEE 802.3af
standard and the S-1110PP models are compatible with Powered Devices that
comply with both the IEEE 802.3af and the 802at-2009 standard. The fiber
connection can be either single mode (SM) or multimode (MM) and can operate
over different wavelengths and distances, depending on the model selected (see
table below).
2 Port Models
PoE (P)
PoE+ (PP)
Connector
(xx)
Mode
Distance
Wavelength
(TX/RX)
S-1110P-M2xx05
S-1110PP-M2xx05
SC/ST
MM
550 m/1804 ft.
850 nm
S-1110P-S2xx10
S-1110PP-S2xx10
SC/ST
SM
10 km/6.2 mi.
1310 nm
S-1110P-S1SC10U
S-1110PP-S1SC10U
SC
SM
10 km/6.2 mi.
1310/1490 nm
S-1110P-S1SC10D
S-1110PP-S1SC10D
SC
SM
10 km/6.2 mi.
1490/1310 nm
S-1110P-S1SC20U
S-1110PP-S1SC20U
SC
SM
20 km/12.4 mi.
1310/1490 nm
S-1110P-S1SC20D
S-1110PP-S1SC20D
SC
SM
20 km/12.4 mi.
1490/1310 nm
S-1110P-S2xx40
S-1110PP-S2xx40
SC/ST
SM
40 km/25 mi.
1310 nm
S-1110P-S1SC40U
S-1110PP-S1SC40U
SC
SM
40 km/25 mi.
1310/1490 nm
S-1110P-S1SC40D
S-1110PP-S1SC40D
SC
SM
40 km/25 mi.
1490/1310 nm
S-1110P-S2xx70
S-1110PP-S2xx70
SC/ST
SM
70 km/43.5 mi.
1550 nm
S-1110P-S1SC80U
S-1110PP-S1SC80U
SC
SM
80 km/50 mi.
1510/1590 nm
S-1110P-S1SC80D
S-1110PP-S1SC80D
SC
SM
80 km/50 mi.
1590/1510 nm
S-1110P-S2xx120
S-1110PP-S2xx120
SC/ST
SM
120 km/74.6 mi.
1550 nm
