20
Perle Type 4 High-Power PoE Ethernet Media Converter
Installation Guide
One grounding lug (not provided).
One 18 - 12 AWG wire (not provided).
Cross-head screwdriver (not provided).
Note:
For your safety, when installing this equipment, always
ensure that the chassis ground connection is installed first and
disconnected last.
Attaching the Grounding Lug
1. Attach the grounding lug to one end of an 18-12 AWG wire.
2. Attach the grounding lug to the chassis and secure with the
grounding screw(s).
Attaching the Power Cord Strain Relief
Clip
1. Feed the power cord through the opening in the power cord
relief clip.
2. Attach the power cord relief clip to the chassis and secure with
the provided screw.
3. Plug the power cord into the DC power connector at the rear
of the chassis.
