Perle Type 4 High-Power PoE PSE Ethernet Media Converter
11
Installation Guide
Bank 2
Note:
All switch changes take effect immediately. Switch changes will cycle power
to the PD only if the PD Reset switch is set to On or you make changes to the PSE
Power switches.
DIP Switch Settings
Bank 1
Auto Negotiation copper (Switch 1)
Switch Position
Copper 1
Copper 2
Up (default)
Auto
Auto
Down
Off
Auto
Note:
Auto negotiation should only be turned off, if the copper link
partner does not support Auto Negotiation and fixed settings are
required by the copper link partner. Copper port 2 only supports
Auto negotiation.
Auto
: The media converter will negotiate with its link partner to
determine the most optimal parameters for this connection. The S-
1110HP will advertise capabilities of 10,100 and 1000 Mbps, full
and half duplex as well as pause, and remote fault capabilities to
the link partner.
If the copper link partner does not support Auto negotiation, the S-
1110HP will parallel detect to 10 or 100 Mbps and force Half
Duplex mode as per IEEE specifications.
